Click Here to Print This Page

For Sale Listing #24376

2016 International Tandem Axle Hi-Rail Gang Truck  Chassis:  2016 IHC, 7600 SBA 6x4  63,240 miles, original motor dropped a valve, 2500 miles on new pistons & liners  Application: RR Hi-Railer  Mission: Requested GVWR: 54000. Calc. GVWR: 54000  Calc. Start / Grade Ability: 21.31% / 2.71% @ 55 mph  Calc. Geared Speed: 74.6 mph  Dimension: Wheelbase: 268.00, CA: 157.00, Axle to Frame: 81.00  Engine, Diesel: {Navistar N10 330} 330HP @ 2000 RPM, 1250 lb-ft Torque @ 1400 RPM, 2100 RPM  Governed Speed, 330 Peak HP (Max)  Transmission, Fuller RTO-14908LL  PTO Provision, Less Retarder, Includes Oil Level Sensor, On/Off Highway  Clutch: Omit Item (Clutch & Control)  Axle, front non-driving: {Meritor MFS-14-143A} Wide Track, I-Beam Type, 14,000-lb Capacity  Axle, rear, tandem: {Meritor MT-40-14X-4DCR} Single Reduction, 40,000-lb Capacity, 0.433"(11mm) Wall Housing  Thickness, Driver Controlled Locking Differential in Forward-Rear and Rear-Rear Axle, R Wheel Ends Cab: Conventional 6-Man Crew Cab  Tire, Front: (2) 12R22.5 Load Range H HSR2 (continental), 483 rev/mile, 75 MPH, All-Position  Tire, Rear: (8) 11R22.5 Load Range G HDR2 Eco Plus (Continental), 491 rev/mile, 75 MPH, Drive  Suspension, Rear, Air, Tandem: {Hendrickson HAS-402-55} 40,000-lb Capacity, 55in Axle Spacing, 9.5in Ride Height, with Shock Absorbers, Mounted Inboard  Frame Reinforcement: Outer C Channel, Heat Treated Alloy Steel (120,000 PSI Yield); 10.813in x 3.892in x 0.312in; (274.6mm x 98.9mm x 8.0mm); 480in (12192mm) Maximum OAL Paint: Cab schematic 100GN  Location 1: 9219, Winter White (Std)   Four drop down steps, one under each door for easy access on rail   Body:   Knapheide NS129HT Tandem  Quoted by Knapheide to match the existing body at Wheeling & Lake Erie RW  The serial number of the existing body was provided to Knapheide  Diamond plate steps / bumper to house tool circuits and crane  Hand railings built into rear body steps for rail access  Two pull out steps in rear bumper. For access on rail  Front crane boom support built into front of body  Sprayed on bed liner on all walk areas  Body installed  Pintel hitch    Crane:   14/98SL (single link)  3 hydraulic extensions  Standard outriggers, spread of 15ft 2in  Fixed stabilizers  Scanreco remote controls  Shear mount kit  LCD display on transmitter  Crane installed and tested    Hydraulics:   PTO, with automatic lockout system to disengage if RPM exceeds 1400  Load sense piston pump  50 gallon aluminum hydraulic tank  Single filter base  Multi visc. Hydraulic oil  Heavy duty frame mounted oil cooler    Tool Circuit:   (2) 5/10 gpm. tool circuit  Hanney hose reel  ½in x 50ft twin hose reel with roller guide, mounted on rear of chassis    Oxy / Acty:    Hose reel  Oxy/acty hose  Installed on rear bumper    Hi-Rail Gear:    DMF RW1630/30 rail gear  Air brakes, front  Rail sweeps, front  Slotted rear links  Rear air pin offs  Axle end insulation    Track Lighting:    LED work lights mounted on all four corners, on in cab switches  LED lights mounted to light up hi-rail gear at all four corners, on in cab switches  LED work lights (2) mounted in bed area, on in cab switches  Two mirror mounted strobe light, on in cab switches  Four corner strobe lights, on in cab switches   Misc:   Operators manuals  DOT striping  Fire extinguisher, triangles and first aid kit  Contact for Pricing 
Location: North