DFBA Logo

D. F. Barnhardt and Associates





LISTING REFERENCE NUMBER: FST15996

2006 Sterling LT9513 Section Knuckle Crane Truck
New rack and new equipment

CHASSIS / CAB:
2006 Sterling LT9513
20,000 lb. GVWR Front Axle
46,000 lb. GVWR Rear Axle
Tuff Trac 46,000 lb suspension
410 HP Mercedes 12.8L, Diesel Engine
232,368 miles
Eaton / Fuller RTO-16908LL Transmission
202” CT
266” Wheelbase
118” After frame
Full Air Brakes
Dual 50 Gallon Fuel Tanks
Air Conditioning
Air-ride driver’s seat
Fixed base passenger seat
Cab - White in Color

BODY:
Flatbed body (22’-2”) long x 102” wide
6” channel sides
4” cross channels 16” on centers
6”x3”x3/8”x303” rec. tube long sills, Domex steel, full length back of can to end of crane
6 gussets per side are installed on the long sills and cross channels
Flatbed flooring to be 3/16 inch AR450 steel
Eight (four per side) removable 3” diameter tubular steel side posts 45” high. Post are spaced on approximately 54” centers. (4) ratchet strap hold-downs installed in channels (for lateral adjustment) under bed streetside
(2) access ladders with grab handles for access to flatbed one curbside and one streetside
Rear pintle hook, properly reinforced to chassis frame. Top of hitch to be located 24” above ground level. Includes lighting socket and brake pedal controller

FRONT BULK HEAD / RAIL RACK:
Front bulkhead / rail rack to be constructed of 4” x 4” x ¼” wall steel tubing with outside dimensions of 102” wide x 63” high installed directly behind chassis cab. Sheet steel used to be 1/4” thick
Expanded metal window in bulkhead to match rear cab window. Rail rack saddles are comprised of (4) four 4” x 4” x ¼” wall structural steel tubing, 6” high vertical stanchions (two per side) on top of bulkhead frame. Stanchions are spaced 19” (inside dimension) for rail containment
Rail rack to be capable of hauling (6) 132 lb. x 39’ rails, (3) per side
Rail saddles to be protected by 2 ¾” thick rubber blocks

REAR BULKHEAD:
Rear bulkhead to be constructed of ¼” plate
Outside dimension of bulkhead to be 102” wide x 40” high

REAR RAIL RACK:
Height to be 3” lower than front rail rack in order to clear the rotation of the loader
Rack construction similar to front rack
Gusset for additional strength welded from outside of rack tube to bottom section of vertical channels

UNDERBODY COMPARTMENTS:
Three tool boxes mounted under body
(2) 60” x 18” x 18”
(1) 48’ x 18” x 18”
Door latches to be “T” handle twist-type with locks keyed alike
Doors equipped with hold back chains
Door openings to be sealed with automotive style bulb-type weather-stripping
Compartment to be painted black

HIAB H244-3.4 CRANE:
162,510 ft-lb capacity with three hydraulic extensions to 33’10”
Lift Capacities:
8’2” – 19,180 lbs
14’1” – 11,460 lbs
19’8” – 8,050 lbs
26’3” – 5,950 lbs
33’6” – 4,630 lbs
Working pressure, 4,640 psi
Height in folded position, 92”
Width in folded position, 98”
Install space required, 47”
Crane & outrigger weight, 6,700 lbs
Radio remote, XS-Drive 6 function radio remote control system. Hydraulic extendable stabilizer extension beams to 23”
Stabilizer legs, manually tiltable + 50deg (29”-55” below installation surface)
Stabilizers are controlled from a separate, 4F stabilizer valve w/manual controls

RAILGEAR:
DMF model RW1630 front and 1650 rear railgear
Insulated axles with one piece wheels
Rail sweeps front and rear
Slotted links
Air brakes front with switch in cab
Front bumper mounted sight rods
Install and plumb front and rear railgear
Align and rail test

HYDRAULICS:
Muncie 82 Series Air shift PTO
Install tandem hydraulic pump (this pump provided for operation of loader and hirail)
50 gallon hydraulic oil reservoir mounted on curbside of chassis frame
Heavy duty oil cooler
Hydraulic return line filter to be located at reservoir

TOOL CIRCUIT:
A) 5/10 gpm tool circuit
B) Hanney hose reel
½” x 50’ twin hose reel with roller guide – exits rear of body

LIGHTING AND ELECTRICAL:
Electronic backup alarm mounted at rear of chassis. All lighting to be recessed and conform to FMVSS 108
Amber strobe light mounted under streetside loader access ladder with lighted toggle switch in cab
Amber strobe light mounted center of head board with lighted toggle switch in cab
Two forward and two rear facing work lights mounted at loader frame and protected by access ladders with lighted toggle switch in cab

MISCELLANEOUS:
Body painted black, wood sides are not to be painted
Triangular warning reflector kit mounted in cab
3A-40BC, 5 lb. fire extinguisher mounted in cab
Back up alarm
Conspicuity striping
All applicable operator’s, maintenance, and parts manuals shall accompany vehicle upon delivery to unit’s destination

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 15996

Listing Photo

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 15996

Listing Photo

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 15996

Listing Photo

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 15996

Listing Photo

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 15996

Listing Photo

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 15996