DFBA Logo

D. F. Barnhardt and Associates





LISTING REFERENCE NUMBER: FST24376

2016 International Tandem Axle Hi-Rail Gang Truck
Chassis:
2016 IHC, 7600 SBA 6x4
63,240 miles, original motor dropped a valve, 2500 miles on new pistons & liners
Application: RR Hi-Railer
Mission: Requested GVWR: 54000. Calc. GVWR: 54000
Calc. Start / Grade Ability: 21.31% / 2.71% @ 55 mph
Calc. Geared Speed: 74.6 mph
Dimension: Wheelbase: 268.00, CA: 157.00, Axle to Frame: 81.00
Engine, Diesel: {Navistar N10 330} 330HP @ 2000 RPM, 1250 lb-ft Torque @ 1400 RPM, 2100 RPM
Governed Speed, 330 Peak HP (Max)
Transmission, Fuller RTO-14908LL
PTO Provision, Less Retarder, Includes Oil Level Sensor, On/Off Highway
Clutch: Omit Item (Clutch & Control)
Axle, front non-driving: {Meritor MFS-14-143A} Wide Track, I-Beam Type, 14,000-lb Capacity
Axle, rear, tandem: {Meritor MT-40-14X-4DCR} Single Reduction, 40,000-lb Capacity, 0.433"(11mm) Wall Housing
Thickness, Driver Controlled Locking Differential in Forward-Rear and Rear-Rear Axle, R Wheel Ends Cab: Conventional 6-Man Crew Cab
Tire, Front: (2) 12R22.5 Load Range H HSR2 (continental), 483 rev/mile, 75 MPH, All-Position
Tire, Rear: (8) 11R22.5 Load Range G HDR2 Eco Plus (Continental), 491 rev/mile, 75 MPH, Drive
Suspension, Rear, Air, Tandem: {Hendrickson HAS-402-55} 40,000-lb Capacity, 55in Axle Spacing, 9.5in Ride Height, with Shock Absorbers, Mounted Inboard
Frame Reinforcement: Outer C Channel, Heat Treated Alloy Steel (120,000 PSI Yield); 10.813in x 3.892in x 0.312in; (274.6mm x 98.9mm x 8.0mm); 480in (12192mm) Maximum OAL Paint: Cab schematic 100GN
Location 1: 9219, Winter White (Std)
Four drop down steps, one under each door for easy access on rail

Body:

Knapheide NS129HT Tandem
Quoted by Knapheide to match the existing body at Wheeling & Lake Erie RW
The serial number of the existing body was provided to Knapheide
Diamond plate steps / bumper to house tool circuits and crane
Hand railings built into rear body steps for rail access
Two pull out steps in rear bumper. For access on rail
Front crane boom support built into front of body
Sprayed on bed liner on all walk areas
Body installed
Pintel hitch

Crane:

14/98SL (single link)
3 hydraulic extensions
Standard outriggers, spread of 15ft 2in
Fixed stabilizers
Scanreco remote controls
Shear mount kit
LCD display on transmitter
Crane installed and tested

Hydraulics:

PTO, with automatic lockout system to disengage if RPM exceeds 1400
Load sense piston pump
50 gallon aluminum hydraulic tank
Single filter base
Multi visc. Hydraulic oil
Heavy duty frame mounted oil cooler

Tool Circuit:

(2) 5/10 gpm. tool circuit
Hanney hose reel
½in x 50ft twin hose reel with roller guide, mounted on rear of chassis

Oxy / Acty:

Hose reel
Oxy/acty hose
Installed on rear bumper

Hi-Rail Gear:

DMF RW1630/30 rail gear
Air brakes, front
Rail sweeps, front
Slotted rear links
Rear air pin offs
Axle end insulation

Track Lighting:

LED work lights mounted on all four corners, on in cab switches
LED lights mounted to light up hirail gear at all four corners, on in cab switches
LED work lights (2) mounted in bed area, on in cab switches
Two mirror mounted strobe light, on in cab switches
Four corner strobe lights, on in cab switches

Misc:

Operators manuals
DOT striping
Fire extinguisher, triangles and first aid kit
Contact for Pricing
Location: North

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 24376

Listing Photo

PLEASE CALL 704-436-9393 FOR MORE INFORMATION

D. F. Barnhardt and Associates Reference Number: 24376