See your ad here »
Ref# FST24376
Trucks For Sale
   2016 International Tandem Axle Hi-Rail Gang TruckChassis: 2016 IHC, 7600 SBA 6x4 63,240 miles, original motor dropped a valve, 2500 miles on new pistons & liners Application: RR Hi-Railer Mission: Requested GVWR: 54000. Calc. GVWR: 54000 Calc. Start / Grade Ability: 21.31% / 2.71% @ 55 mph Calc. Geared Speed: 74.6 mph Dimension: Wheelbase: 268.00, CA: 157.00, Axle to Frame: 81.00 Engine, Diesel: {Navistar N10 330} 330HP @ 2000 RPM, 1250 lb-ft Torque @ 1400 RPM, 2100 RPM Governed Speed, 330 Peak HP (Max) Transmission, Fuller RTO-14908LL PTO Provision, Less Retarder, Includes Oil Level Sensor, On/Off Highway Clutch: Omit Item (Clutch & Control) Axle, front non-driving: {Meritor MFS-14-143A} Wide Track, I-Beam Type, 14,000-lb Capacity Axle, rear, tandem: {Meritor MT-40-14X-4DCR} Single Reduction, 40,000-lb Capacity, 0.433"(11mm) Wall Housing Thickness, Driver Controlled Locking Differential in Forward-Rear and Rear-Rear Axle, R Wheel Ends Cab: Conventional 6-Man Crew Cab Tire, Front: (2) 12R22.5 Load Range H HSR2 (continental), 483 rev/mile, 75 MPH, All-Position Tire, Rear: (8) 11R22.5 Load Range G HDR2 Eco Plus (Continental), 491 rev/mile, 75 MPH, Drive Suspension, Rear, Air, Tandem: {Hendrickson HAS-402-55} 40,000-lb Capacity, 55in Axle Spacing, 9.5in Ride Height, with Shock Absorbers, Mounted Inboard Frame Reinforcement: Outer C Channel, Heat Treated Alloy Steel (120,000 PSI Yield); 10.813in x 3.892in x 0.312in; (274.6mm x 98.9mm x 8.0mm); 480in (12192mm) Maximum OAL Paint: Cab schematic 100GN Location 1: 9219, Winter White (Std) Four drop down steps, one under each door for easy access on rail Body: Knapheide NS129HT Tandem Quoted by Knapheide to match the existing body at Wheeling & Lake Erie RW The serial number of the existing body was provided to Knapheide Diamond plate steps / bumper to house tool circuits and crane Hand railings built into rear body steps for rail access Two pull out steps in rear bumper. For access on rail Front crane boom support built into front of body Sprayed on bed liner on all walk areas Body installed Pintel hitch Crane: 14/98SL (single link) 3 hydraulic extensions Standard outriggers, spread of 15ft 2in Fixed stabilizers Scanreco remote controls Shear mount kit LCD display on transmitter Crane installed and tested Hydraulics: PTO, with automatic lockout system to disengage if RPM exceeds 1400 Load sense piston pump 50 gallon aluminum hydraulic tank Single filter base Multi visc. Hydraulic oil Heavy duty frame mounted oil cooler Tool Circuit: (2) 5/10 gpm. tool circuit Hanney hose reel ½in x 50ft twin hose reel with roller guide, mounted on rear of chassis Oxy / Acty: Hose reel Oxy/acty hose Installed on rear bumper Hi-Rail Gear: DMF RW1630/30 rail gear Air brakes, front Rail sweeps, front Slotted rear links Rear air pin offs Axle end insulation Track Lighting: LED work lights mounted on all four corners, on in cab switches LED lights mounted to light up hi-rail gear at all four corners, on in cab switches LED work lights (2) mounted in bed area, on in cab switches Two mirror mounted strobe light, on in cab switches Four corner strobe lights, on in cab switches Misc: Operators manuals DOT striping Fire extinguisher, triangles and first aid kit Contact for Pricing Location: North For more information about this listing Ask to speak with Garrett Crouch 
|
